Seguir

New Concept/Multi-functional
Imaging System,

Image is not available

New Concept/Multi-functional
Imaging System.

Image is not available

New Concept/Multi-functional
Imaging System.

Image is not available

New Concept/Multi-functional
Imaging System.

Image is not available
Arrow
Arrow

Especificaciones


Video

Panoramic Imaging

By choosing a sensor, which improves the image quality while keeping radiation exposure to a minimum, Genoray has shown that it puts patient’s safety first.

Cephalometric Imaging

When compared to the standard scanning method, PAPAYA PLUS has the shortest scan time out there
Among patient discomfort, image's swing, and distortion, they are reduced along with the short scan time.

Tomography Imaging (Optional)

PAPAYA PLUS added Tomography function and without hardware upgrade and considering of manufacturing of Tomography function; in addition to S/W, PAPAYA provides Tomography image.

High Resolution Cephalometric Technology

It is enough only 4 second for scanning cephalo image on fast mode.
This reduces motion artifacts.
 

The Different Detector Types

High-Definition images distinguish themselves from the old indirect conversion type of a CCD sensor. This should be the only way you view images.
  • Balance prevents position errors during scan
  • Stability reduces installation requirements

User Friendly

Face to face positioning / Fit each individual’s jaw shape. / Voice support system / Hand switch / Emergency switch / Wheelchair accessible
 

Multi-Focus Function

Multi-focus function ables to overcome operator's mistake from patient's faulty positioning and re-exposuring X-ray. By reconstructing image with software way, the panoramic images layer can be corrected by multi-focus function.

Exposure Programs

Lateral, AP, PA, Water’s view, Submento vertex, and carpus.

Especificaciones Técnicas (PAPAYA 2D Plus Semi TAC)

General
  
Exposición Panorámica Si
Exposición Cefalométrica Si
Tiempo de Exposición Panorámica 9 ~ 17 seg.
Tiempo de Exposición Cefalométrica 4 ~ 12 seg.
Altura del campo de imagen 150mm
Punto Focal 0.5mm
Ángulo de Destino
Voltaje Máximo del Tubo 90kV
Voltaje Mínimo del Tubo 60kV
Capacidad de almacenamiento de calor del ánodo 35kJ
Capacidad máxima de disipación de calor del ánodo 250W
Voltaje en línea 220V, 50/60Hz
Sensor
  
Tipo Conversión Directa
Tecnología de Detección CMOS
Interfaz de Datos Giga Ethernet
Tamaño del Pixel lOOum x lOOum
MTF Hasta 80%@ 2.Slp/mm
Rango Dinámico >=72dB
DQE(70kV, O lp/mm) >=0.8
CUST
  
X-ray beam fan beam
Tamaño de la Imagen Volumétrica 50x50x103mm
Número de slices 256
Grosor del slice 0.195 mm

Dimensiones

ppy 2d plus dimensiones

PAPAYA 2D Plus Semi TAC: Imágenes de ejemplo

  • Simple Item 11

    Simple Item 11

  • Simple Item 10

    Simple Item 10

  • Simple Item 9

    Simple Item 9

  • Simple Item 12

    Simple Item 12